We stock a wide range of Amtecs Motors. The manufacturer offers a full range of AC motors including IE2, IE3, brake motors, single phase, ATEX and force ventilated units.

IE2  IE3 motors are manufactured in accordance with IEC 34-1/9

The bearings are maintenance free lubricated with lithium-based grease

Amtecs motors are fitted with V-seals

Windings are vacuum pressure impregnated and made of high quality insulated wire and insulation material. The impregnation is an evaporation free process, suitable for tropical climate zones.

The rotors are dynamically balanced with half key, in accordance with IEC 34-14, class N (Normal)

Overload capability, in compliance with IEC 34, 1.5 times the rated current for 2 minutes and 1.6 times the rated torque for 15 seconds.

Mounting is available in B3, B5, and B35.

Motor Specifications

• Frame sizes: IEC size 80-315
• Output range: 0.75-315Kw
• Protection class: IP55
• Insulation class: F
• Temperature rise: Class B
• Cooling: TEFC,
• Surface painting: Colour RAL 5010, General industrial, to IEC 721-2-1
• Bearings: Deep groove ball bearings, NSK
• Altitude: 1000m above sea level
• Ambient temp range: 35̊C to 40̊C

We also provide a full modification service for special shafts and mountings & also a repair, rewind and rebuild service. A motor repair is often an solution for non-standard motors or larger units where you may want to consider a more cost effective option. This is often the case with larger motors when lead time is not critical and the repair is around 50% of the cost of the new motor. We carry out all our rewinds to the AEMT best code of practice to maintain motor efficiency and give you the reassurance that your motor is in the best possible hands.